All-Sun EM2271 Professional Injector Tester Fuel Injector 4 Pluse Modes Tester Powerful Fuel System Scan Tool

This tester is designed to not-destructively measure the thickness of non-magnetic coatings (including paint enamel ,plastic ,epoxy, etc) on iron ,steel or Aluminum.

UKOBD2 Provide top quality All-Sun EM2271 Professional Injector Tester Fuel Injector 4 Pluse Modes Tester Powerful Fuel System Scan Tool, if you need All-Sun EM2271 Professional Injector Tester Fuel Injector 4 Pluse Modes Tester Powerful Fuel System Scan Tool, or have any questions about All-Sun EM2271 Professional Injector Tester Fuel Injector 4 Pluse Modes Tester Powerful Fuel System Scan Tool, welcome to contact us.

Wholesale Top quality VAS6154, GM Tech2, VCM II For Ford, Porsche Piwis III, USB Link 2, Scania VCI3, CAN Clip, wiTech MicroPod 2, T300 key programmer, locksmith tools

images of All-Sun EM2271 Professional Injector Tester Fuel Injector 4 Pluse Modes Tester Powerful Fuel System Scan Tool

Warning!!!
1.Battery insided already,please remember to take off the insulate strip.
2.Please don't use this device under 0 degrees Celsius !
3.The device is not available in measuring metallic paint on car or similar objects.
4.This tester may not be used to test your home appliances
(refrigerator,oven,microwave oven,etc)
5.For measurements in AUTO test mode and on object with steel substrate
±(10% of reading + 0.10mm),
most car is made of steel, and, if you get result of 0.00mm or 0.01mm , it is under normal
condition,acceptable error, because most car paint thickness is 0.1-0.15mm.

6. There is not calibration plates in the parcel of EM2271. It doesn't need calibration.
If you need, please contact us.
7 . Please press the probe vertical to the object, and make sure the object surface is smooth and clean.
EM2271 Specifications:
• Measurement range: 0.0 to 2.0 mm, 0 mil to 80 mil

• Accuracy: 2%rdg +-0.1 mm, or 2%rdg+-4 mil

• Resolution:0.1 mm/1 mil

• Power supply: 1 x 3 V button cell, CR2032 or equivalent,

• Measuring technology: Magnetic

• Size :6.9 x 3.8 x 2 cm

• Weight: About 23 grams (including button cell)
How the device work
1. Probe
Before measurement, place the tester with its probe firmly against target surface.

2. Display

3. "TEST" button

(1). Press "TEST" button to turn on the tester. Press and hold down this button for about 1 second to turn off the tester.
(2). Press "TEST" button to delete the reading on the display,the display will show "- -".

4. "UNIT" button
Press this "UNIT" button to select desired unit: mm or mil
EM2271A
The upgrated EM2271.
It can measure the Fe & NFe.
Accuracy improved 10, measurement range extended,
resolution higher, better cost-efficiency.
​For measurements in AUTO test mode and on object with steel substrate
±(10% of reading + 0.10mm),
most car is made of steel, and, if you get result of 0.00mm or 0.01mm , it is under normal
condition,accpetable error, because most car paint thickness is 0.1-0.15mm.

Go to Buy: All-Sun EM2271 Professional Injector Tester Fuel Injector 4 Pluse Modes Tester Powerful Fuel System Scan Tool

Tags: All-Sun EM276, All-Sun EM276 Injector Tester
Prev: Lexia 3 PP2000 AERMOTOR Diagbox V7.8 NECchip is Suitable for PSA Peugeot Citroen Full Chip
Next: GODIAG GD801 Android OBDII Key Programmer Plus GT100 AUTO TOOLS Supports Mileage Correction ABS EPB TPMS EEPROM