Original AutoTuner Tool Slave Version ECU/TCU Programming Tool Support OBD Bench Boot No Subscription Automatic Checksum Correction
AutoTuner Tool Device is a newer style ECU programmer supporting BDM / Bench and OBD. Its also a ONE time payment device. Autotuner is characterised by its single fee package, its ease of use and high efficiency. Autotuner is a universal tool which is able to read information from most ECUs and microcontrollers available on the market in boot tricore Infineon (BSL) or via the OBD diagnostic socket.
UKOBD2 Provide top quality Original AutoTuner Tool Slave Version ECU/TCU Programming Tool Support OBD Bench Boot No Subscription Automatic Checksum Correction, if you need Original AutoTuner Tool Slave Version ECU/TCU Programming Tool Support OBD Bench Boot No Subscription Automatic Checksum Correction, or have any questions about Original AutoTuner Tool Slave Version ECU/TCU Programming Tool Support OBD Bench Boot No Subscription Automatic Checksum Correction, welcome to contact us.
Wholesale Top quality VAS6154, GM Tech2, VCM II For Ford, Porsche Piwis III, USB Link 2, Scania VCI3, CAN Clip, wiTech MicroPod 2, T300 key programmer, locksmith tools
images of Original AutoTuner Tool Slave Version ECU/TCU Programming Tool Support OBD Bench Boot No Subscription Automatic Checksum Correction
AutoTuner Tool Device – Slave Version (No Subscription, Free Updates, 5-Year Warranty)
Product Introduction
The AutoTuner Tool Device is a modern ECU programmer supporting BDM / Bench and OBD operations. It is a one-time payment device characterized by its single-fee package, ease of use, and high efficiency. As a universal tool, it can read information from most ECUs and microcontrollers available on the market—including boot tricore Infineon (BSL) units—either directly or via the OBD diagnostic socket.
Autotuner is continuously enhanced with new reading protocols, which you can access immediately upon launching the Autotuner Software.
Product Features
Ultra-Fast Process
Thanks to optimized ECU communication and its Cortex M4 processor, memory content (Dflash, Eflash, and EEPROM) is read at ultra-fast speeds. The device also systematically performs an online backup of the TriCore password.
All-in-One Package Ready to Use
Autotuner comes with all necessary accessories in a dedicated package.
Easy-to-Use Software
All compatible vehicles are displayed in a clear list, allowing quick and easy selection of the desired ECU.
In-Software Help Section
Autotuner assists in locating the ECU or OBD diagnostic socket on the vehicle and guides you step-by-step through the reading process, illustrating each step with high-definition photos.
Free Continuous Updates
All information is continuously updated at no additional cost.
No Subscription Required
This tool receives ongoing updates—completely free of charge.
5-Year Warranty
The Autotuner tool is covered by a 5-year warranty. In the event of any major issue, we will arrange immediate replacement.
Reading and Writing of Engine Control Units & Gearboxes
Autotuner can read data from most ECUs and microcontrollers currently available on the market.
Automatic Checksum Correction
Checksum correction is handled automatically during the writing process—no manual calculation required.
Live Datalogging
The Autotuner datalogging feature is designed for simplicity. For each supported ECU, a set of relevant data parameters—tailored to the vehicle and manufacturer—is pre-selected.
Back to Stock
To begin with a reliable and up-to-date baseline, use the “Back to Stock” function to restore the vehicle to its original factory settings.
DTC Functionality
Read and delete both generic and manufacturer-specific Diagnostic Trouble Codes (DTCs) via the OBD-II socket.
Difference Between Master and Slave Tools
Master Tool
A master tool provides non-encrypted files, enabling you to modify them yourself or send them to any tuning file provider. Any editing software that supports binary files can be used to edit files read with Autotuner.
Slave Tool
A slave tool reads and writes encrypted files that can only be modified by a designated master—a specific file provider assigned when you purchase the tool. Your slave tool is permanently linked to this master.
Any slave tool can be remotely upgraded to a master tool if the following conditions are met:
- Your current master provides written approval for the switch.
- You pay the applicable price difference.
Package Includes
- 1pc x Main Unit
- 1pc x USB Key with software link
- 1pc x Universal cable+box
- 1pc x Universal cable for EDC16+ME(D)9
- 1pc x OBD cable
- 1pc x USB cable
- 1pc x Power Supply
- 1pc x Probe positioning kit
- 1pc x BGA MCU hook
- 1pc x Banana cables
- 1pc x Shockproof suitcase
- 1pc x Goodies