2in1 Handheld Oscilloscope 2 Channels with Color Screen Scope Digital Multimeter DMM Meter EM1230
2in1 Handheld Oscilloscope 2 Channels with Color Screen Scope Digital Multimeter DMM Meter EM1230
UKOBD2 Provide top quality 2in1 Handheld Oscilloscope 2 Channels with Color Screen Scope Digital Multimeter DMM Meter EM1230, if you need 2in1 Handheld Oscilloscope 2 Channels with Color Screen Scope Digital Multimeter DMM Meter EM1230, or have any questions about 2in1 Handheld Oscilloscope 2 Channels with Color Screen Scope Digital Multimeter DMM Meter EM1230, welcome to contact us.
Wholesale Top quality VAS6154, GM Tech2, VCM II For Ford, Porsche Piwis III, USB Link 2, Scania VCI3, CAN Clip, wiTech MicroPod 2, T300 key programmer, locksmith tools
images of 2in1 Handheld Oscilloscope 2 Channels with Color Screen Scope Digital Multimeter DMM Meter EM1230
Digital 2 in 1 Handheld Portable Oscilloscope + Multimeter 25MHz Dual/ Two Channel Waveform Real Time Sample Rate 100MSa/s LCD Backlight EM1230
And one ofbest 2 in 1 test tools in outdoor testing, repairing or teaching.
> When the real time sample rate is 100MSa/s, the bandwidth is 25MHz.
> Its multimeter part uses a dedicated chip (6000-count), which can provide a higher precision.
> The large capacity lithium battery can ensure at least 6 hours working after fully charged.
| Bandwidth | DC - 25MHz ( -3dB ) |
| Channel Number | 2 |
| Raise Time | 14ns |
| Sampling Rate | 100MSa/s |
| Horizontal Sensitivity | 10ns/div - 5s/div |
| Horizontal Precision | 0.01% + 1 pixel |
Vertical
| Vertical Sensitivity | 10mV/div - 500V/div |
| Vertical Precision | ±(3% + 1 pixel) |
| Vertical Resolution | 8 bit |
| Maximum Allowable Input Voltage | CAT II 300V |
| Coupling | AC, DC |
| Input Impedance | 1MΩ, ≤20pF |
Trigger
| Trigger Source | CHA, CHB, external trigger |
| Trigger Mode | Normal, Auto, Single |
| Trigger Sensitivity | ≤1.0 div |
| Trigger Slope | rising or falling edge of waveform |
| Trigger Coupling | AC, DC |
Multimeter Performance
| Display | 6000 counts |
| Max. Allo wable Input Voltage | CAT III 600V |
Miscellaneous
| Cursor Measurement | time and voltage measurements |
| Display | 3.5″ TFT LCD, 52mm×70mm, 240 ×320 pixels |
| Memory Location locations | 10 waveform storage locations and 10 setup storage |
| Battery | 3.7V lithium battery |
| Power Adapter | Output: DC 5V/8W |
| Operating Environment | Temperature: 0°C ~ 40°C |
| Relative Humidity: ≤ 75% | |
| Storage Environment | Temperature: -10°C ~ 50°C |
| Relative Humidity: ≤ 85% | |
| Operating Altitude | 0 ~ 2000m |
| Dimensions | 212mm × 121mm × 50mm ( for main body only ) |
| Weight | About 700g |
Multimeter Specifications
| Function | Range | Accuracy |
| DC Voltage | 600mV/6V/60V/600V/1000V | ±(1% + 5 counts ) |
| AC Voltage | 600mV/ 6V/ 60V/ 600V/1000V | ±(1.2% + 5 counts ) |
| DC Current accuracy | See the user manual of the current probe. | same as DCV ( add current probe |
| AC Current during | See the user manual of the current probe. | If the current probe’s output voltage measurement is DC voltage,measurem accuracy is DCV measuremenplus current probe accuracy. |
| Resistance | 600Ω/6kΩ/60kΩ/600kΩ/6MΩ | ±(1.2% + 5 counts ) |
| 60MΩ | ±(2% + 5 counts ) | |
| Capacitance | 6nF\600nF\6μF\60μF\600μF\6nF\6mF | ±(4% + 5 counts ) |
| Diode Test | Test voltage is about 3V. | ±(5% + 10 counts ) |
Continuity Test If the resistance is less than about 5Ω, the built-in buzzer will sound.
Go to Buy: 2in1 Handheld Oscilloscope 2 Channels with Color Screen Scope Digital Multimeter DMM Meter EM1230