Opcom OP-Com 2014V Can OBD2 Firmware V1.59 for OPEL Diagnose Supports Cars to Year 2014

OPCOM 2014 diagnostic tool for Opel cars covers almost all Opel cars, even new cars with CAN-BUS based diagnostic, such as Vectra-C, Astra-H, Zafira-B. opcom 2014 lets you read and clear fault codes, support many control units.

UKOBD2 Provide top quality Opcom OP-Com 2014V Can OBD2 Firmware V1.59 for OPEL Diagnose Supports Cars to Year 2014, if you need Opcom OP-Com 2014V Can OBD2 Firmware V1.59 for OPEL Diagnose Supports Cars to Year 2014, or have any questions about Opcom OP-Com 2014V Can OBD2 Firmware V1.59 for OPEL Diagnose Supports Cars to Year 2014, welcome to contact us.

Wholesale Top quality VAS6154, GM Tech2, VCM II For Ford, Porsche Piwis III, USB Link 2, Scania VCI3, CAN Clip, wiTech MicroPod 2, T300 key programmer, locksmith tools

images of Opcom OP-Com 2014V Can OBD2 Firmware V1.59 for OPEL Diagnose Supports Cars to Year 2014

Opcom OP-Com 2014V Can OBD2 Firmware V1.59 for OPEL Diagnose
Top 5 Reasons to Get Opcom OP-Com:

1. Software Version: 2014
Hardware Version: V1.59

2. No need to active the software, can be used directly

3. It covers almost all OPEL cars, even new cars with CAN-BUS based diagnostic, such as Vectra-C, Astra-H, Zafira-B.

4. The program supports many control units, like Engine, Automatic Transmission, ABS, Airbag, Engine Cooling module, Instrument Cluster, Electronic Climate Control, Body Control Unit, just to name a few examples.

5. Supports Cars to Year 2014
Note:
1. Language: English only
2. Never Update It Online, It Will Damage The OP-COM !

Notice of using OP-Com 2014 V software

1.You have to install this "dotnetfx35_SP1" system patch ,or system won't run
2.If you run WIN7 ,you have to open the file as Administrator mode,and refer to the installing video carefully inside the CD
OPCOM 2014 Feature:
1) Full status information (Present, Not present, Intermittent)
2) You can print out, save, or copy the fault codes to any other application. From the fault codes window, you can go directly to the measuring blocks window.
3) The program shows you measuring block information on many control module, you can choose anything from the list on your own.
4) The program is capable of showing 8 measuring block parameter simultaneously. The sample rate is depends mostly on the communication protocol. For example, older system, like Omega-B X 25 DT Engine (ISO-9141-2) can be very slow, during communication, while newer Multec, or Bosch units are faster (using KWP-2000), and the newest CAN based control units are very fast!
OPCOM 2014 Function:
1. The program lets you to read out and clear fault codes, shows you live data, lets you to perform output test.
2. Since OPEL uses many pin in the OBD connector, the diagnostic interface works as a multiplexer, and selects the appropriate pin for communication.
PIN3, PIN7, PIN8, PIN12 = Serial Link (ISO9141, KW81, KW82, KWP2000)
3. Fault codes will be shown with all available information
You can also run output tests on many controllers.
PIN6-PIN14
PIN3-PIN11
PIN1
HSCAN - Dual-wire, High Speed CAN-BUS, 500 kbps
MSCAN - Dual-wire, Medium Speed CAN-BUS, 95 kbps
SWCAN - Single-wire, Low Speed CAN-BUS, 33.3 kbps
Package List:
1. OP COM Interface
2. USB Cable
3. Software and Drivers CD

OPCOM 2014 PCB

Go to Buy: Opcom OP-Com 2014V Can OBD2 Firmware V1.59 for OPEL Diagnose Supports Cars to Year 2014

Tags: Opcom, OP-Com 2014V Can , obd2 diagnostic tool , OPCOM 2014
Prev: Autel MaxiTPMS TS501 TPMS Diagnostic And Service Tool Free Update Online Lifetime
Next: V3.8 AUGOCOM VDM WIFI Diagnostic Tool Support Win7/8 with Honda Adapter Update Online For USA Market Only