Menu

SmartPRO X8-PLUS Universal Programmer Free Update

SmartPRO X8-PLUS Universal Programmer present high-performance on NAND flash and COPLD/FPGA programming, is the most cost effective solution in device programming challenges.

UKOBD2 Provide top quality SmartPRO X8-PLUS Universal Programmer Free Update, if you need SmartPRO X8-PLUS Universal Programmer Free Update, or have any questions about SmartPRO X8-PLUS Universal Programmer Free Update, welcome to contact us.

Wholesale Top quality VAS6154, GM Tech2, VCM II For Ford, Porsche Piwis III, USB Link 2, Scania VCI3, CAN Clip, wiTech MicroPod 2, T300 key programmer, locksmith tools

images of SmartPRO X8-PLUS Universal Programmer Free Update


SmartPRO X8-PLUS Universal Programmer
Top 3 Reasons to Get SmartPRO X8-PLUS:

1. SmartPRO X8-PLUS Software is user friendly, and free life-time software updates are available!
2. SmartPRO X8-PLUS supports M0 and M3 chips built by mainstream manufacturers, such as NXP, STM, Freescale, NUVOTON, FUJITSU and ATMEL. Besides, most M0, M3 chips are burned through parallel interfaces in X8 programmer, taking about less than half the time than that through serial connectors.


3. SmartPRO X8-PLUS supports storages with common protocol standards. External memory chips are usually needed when using M0 and M3 chips. Most of these external memory chips are using SPI, IIC, NOR protocols, etc. These low capacity storages have full support in X8 programmer.

SmartPRO X8-PLUS Parameter specifications:

Model SmartPRO X8-PLUS
Device Support EPROM, Paged EPROM, Parallel and serial EEPROM,
FPGA Serial PROM, NOR FLASH, BPROM, NVRAM,
CPLD, MCU, Firmware HUB, ARM,
Standard Logic Devices (TTL\CMOS), etc. 1.8 - 9V working voltage.
Packaging Support DIP, SDIP, PLCC, JLCC, SOIC, QFP, TQFP, PQFP,
VQFP, TSOP, SOP, TSOPII, PSOP, TSSOP,
SON, EBGA, FBGA, VFBGA, μBGA, CSP, SCSP, etc.
Communication Interface USB 2.0 (High Speed)
Offline Mode Storage No built-in electrical hard disk, a Compact FLASH card
Optional configuration Adapter
Electrical Specification Input electricity: AC 100V-240V/47-63Hz
Output electricity: 12V/2A
Product Specification Main unit specification: 280mm×170mm×57mm (L×W×H)
Weight: 0.5Kg(1.08 Pounds)


Package including:

1pc x SmartPRO X8-PLUS Programmer
1pc x USB Cable
1pc x CD
1pc x User's Manual
1pc x ICP Downloading cable
1pc x AC/DC Adapter

Go to Buy: SmartPRO X8-PLUS Universal Programmer Free Update

Tags: smartpro x8-plus, smartpro universal programmer , smartpro programmer
Prev: E85 Fuel Conversion Kit Working with All Injection Engine EV1 Bosch
Next: Online Version Kess V2 V5.017 with Red PCB Supports 140 Protocol No Token Limited