ECU TOOL EDC15 ME7 For VAG ECU Programmer For AUDI VW

ECU TOOL EDC15 ME7 For VAG ECU Programmer for the complete access to all EEpromdaten with VAG-engine control units of type EDC15 and ME7. Read and write access to the EEprom.

UKOBD2 Provide top quality ECU TOOL EDC15 ME7 For VAG ECU Programmer For AUDI VW, if you need ECU TOOL EDC15 ME7 For VAG ECU Programmer For AUDI VW, or have any questions about ECU TOOL EDC15 ME7 For VAG ECU Programmer For AUDI VW, welcome to contact us.

Wholesale Top quality VAS6154, GM Tech2, VCM II For Ford, Porsche Piwis III, USB Link 2, Scania VCI3, CAN Clip, wiTech MicroPod 2, T300 key programmer, locksmith tools

images of ECU TOOL EDC15 ME7 For VAG ECU Programmer For AUDI VW


ECU TOOL EDC15  ME7 For VAG ECU Programmer

Top 5 Reasons To Get C=VAG ECU TOOL:

1. Read and write access to the EEprom.
2. Reading the secret odometer (if stored in the engine control unit)
3. Immo-off function, login display, VIN change - everything about the diagnosis socket-not removing the ECU.
4. With the write function is motor control "cloning" - no need to teach.
5. Indispensable for workshops, recovery or Chiptuning.

 Functions:

serial EEprom read and save 
EEprom checksum checking and correction 
IMMO on / off 
EEprom from a file and write (clone function) 
Read / write access to the login 
Read / write access to the chassis number 
Read / write access to the Immobilizernummer
Kilometers Motronic in the read and write (if available)    
 
In the ME7 . Controllers can also perform the following functions:   

Offset channels 
Mixture enrichment 
Idling torque change 
Lambda value 
Idle speed change 
Correct charge (only for Turbo engines) 
Ignition timing change     

Supports the following types of Motor Control of BOSCH:

EDC15 
EDC15VM 
EDC15P 
EDC15P +   BOSCH ME7.5 
BOSCH ME7.5.1 
BOSCH ME7.1 
BOSCH ME7.1.1   

Packing List:

1 x VECU TOOL EDC15  ME7 For VAG ECU Programmer

 

Go to Buy: ECU TOOL EDC15 ME7 For VAG ECU Programmer For AUDI VW

Tags: ME7 eeprom programmer, EDC15 EEprom programmer , vag ME7 ecu programmer , vag EDC15 ecu programmer
Prev: Foxwell NT500 VAG Scanner
Next: OBD2 CAN-BUS Scanner Tool Car Diagnostic OES5