New Release VCM2 for LandRover & Jaguar and MAZDA 2 in 1

VCM2 is a PC based diagnostic tool for Mazda system. It support Mazda vehicles after 1996 year till latest models. VCM II offers better benefit and performance than VCM I, support diagnose and module programming. VCM2 also a JLR Approved device, it is Replacement for JLR SDD VCM, Covers CAN, & ISO9141 vehicle networks and 12ft USB cable as standard included.

UKOBD2 Provide top quality New Release VCM2 for LandRover & Jaguar and MAZDA 2 in 1, if you need New Release VCM2 for LandRover & Jaguar and MAZDA 2 in 1, or have any questions about New Release VCM2 for LandRover & Jaguar and MAZDA 2 in 1, welcome to contact us.

Wholesale Top quality VAS6154, GM Tech2, VCM II For Ford, Porsche Piwis III, USB Link 2, Scania VCI3, CAN Clip, wiTech MicroPod 2, T300 key programmer, locksmith tools

images of New Release VCM2 for LandRover & Jaguar and MAZDA 2 in 1


New Release VCM2 for LandRover & Jaguar and MAZDA 2 in 1

Top 7 Reasons to Get VCM 2:
1. Supported vehicle: Mazda, Jaguar & LandRover after 1996 year.
2. Newest IDS Software Version: MAZDA: V91 LandRover & Jaguar: V142
3. Support Multi-languages: Deutsch/ English/ Espano/ francais/ italiano/ nederlands/ Portugues(European) Russian/Japanese/ Chinese and so on.
4. Most cost effective Land Rover pass-thru
5. Best suited for current and future vehicles
6. It is simple and easy to use.

7. Comparison among all VCM II Diagnostic Tools

VCM 2 Mazda Features:

1. The VCM II is the brand new diagnostics interface from Mazda for use with the Integrated Diagnostics Software (IDS).
2. The VCM II is the new Mazda OEM diagnostic tool. It provides dealer-level diagnostics using the IDS software.
3. The VCM II will be required for all new 2013 Mazda vehicles and is backwards compatible with most 16 pin Mazda.
4. The VCM II supports the Vehicle Measurement Module (VMM) and new Customer Flight Recorder (CFR).
5. The VCM II has shock resistant rubber ends, making it suitable for garage and workshop environments.
6. The CFR replaces the Vehicle Data Recorder (VDR).
7. Wireless functionality peferred for all IDS functions including modulereprogramming. USB wired connections ae only required to update the VCM II loaded code and to set up the VCM II to function as a Customer Flight Recorder.
VCM2 JLR Functions:
1. The VCM2 for Land Rover connects directly to the vehicle OBDII (diagnostic) connector and then to a laptop via a USB cable for use with SDD.
2. Once the J2534 DLL files are loaded, this product will allow normal operation with the JLR SDD diagnostic tool.
3. The device is designed as a replacement pass-through vehicle communications device that can be used for the majority of the JLR SDD diagnostic applications.
4. Only SCP communications are not possible with this device.
5. Read & Clear Diagnostic Trouble Codes (DTCs)
6. Live Data-stream with Recording & Playback Functions for Main ECUs
7. Programming & Installation of new ECUs (PCM, ABS, Instrument Cluster, Air Bag, Fuel Pumps, etc.)
8. Set, Adjust or Remove Speed Governors
9. Automatic vehicle recognition
10. New Software Re-flash for Existing ECUs
11. All Other Dealer Functions
12. Steering Angle Resets
13. Guided Fault Finding
14. Program New Keys
15. DPF Regeneration
16. Brake Bleeding
17. Injector Coding
18. Power balance test
19. Relative compression test
Jaguar & Land Rover Vehicle Coverage:
JLR Vehicles Supported?
Defender Yes
Discovery /LR3/LR4 Yes
Range Rover Sport & New Range Rover Sport Yes
Range Rover Yes*
New Range Rover Yes
Freelander /LR2 Yes
Evoque Yes
XJ – X300/X308 No
XJ - X350 No
XJ - X351 Yes
XJS No
XK – X100 No
XK - X150 Yes
XF Yes
S-Type No
X-Type No
F-Type Yes
(Yes) – Vehicle line fully supported:
(Yes*) - Vehicle line fully supported apart from viewing Data logger signals from both ECM and TCM
modules simultaneously on 2006MY variants :
(No) - Vehicle Line Not supported
How does the VCM2 for Land Rover operate in J2534 mode?
1. Please read the user manual firstly before using, install the software after watching the video or user manual in the DVD
2. Connect the J2534 device to the vehicle OBDII connector (the device powers from the vehicle).
3. Connect the 12ft USB cable to the J2534 device and the other end to the SDD laptop.
4. The red vehicle power (PWR) LED will illuminate to show that the device is powered.
5. During communication with the vehicle the status (STS) LED will flash green.
6. The device interacts with the SDD diagnostic tool in the same way as the existing VCM.

Package including:
1pc x LandRover & Jaguar and MAZDA
1pc x OBD2 Cable
1pc x USB Cable
2pcs x CD
1pc x Carrying Case

VCM II PCB Board:





Go to Buy: New Release VCM2 for LandRover & Jaguar and MAZDA 2 in 1

Tags: vcm2, landrover vcm2 , jaguar vcm2 , vcm 2 mazda
Prev: Promotion! DASH Interface 2.1.0 Version For BMW Free Shipping
Next: INPA K+DCAN for BMW With FT232RQ Chip with Switch