Original YHS-787 Digital Process Calibration Multimeter Tester
Original YHS-787 Digital Process Calibration Multimeter Tester is cost-effective device, it is 2 in 1 digital multimeter and loop calibration tool.On the basis of multimeter, it adds function as Measurement, output, and analog DC loop current. It has high accuracy, and also safe and easy to operate.
UKOBD2 Provide top quality Original YHS-787 Digital Process Calibration Multimeter Tester, if you need Original YHS-787 Digital Process Calibration Multimeter Tester, or have any questions about Original YHS-787 Digital Process Calibration Multimeter Tester, welcome to contact us.
Wholesale Top quality VAS6154, GM Tech2, VCM II For Ford, Porsche Piwis III, USB Link 2, Scania VCI3, CAN Clip, wiTech MicroPod 2, T300 key programmer, locksmith tools
images of Original YHS-787 Digital Process Calibration Multimeter Tester
Feature:
1. Multimeter and loop calibrator in one tool
2. CAT1000 V safety- rated, true-RMS multimeter
3. Simultaneous mA and % of scale readout
4. 25% Manual Step plus Auto Step and Auto Ramp on mA output.
5. Simultaneous mA and % of scale readout
6. Min/Max/Average/TouchHold/Relative modes
7. Double displayClear LCD with backlight; 4,000 counts (30,000 counts for dc current)
8. Ni – MH rechargeable batteries
9. 1000V overload protection on V, ohms, frequency.
10. Precision 1000V, 400 mA digital multimeter
11. Measure ac and dc volts, ac and dc current, resistance, continuity, and frequency
12. 0.1% dc voltage accuracy
13. 0.05% dc current accuracy, 1 A resolution to 30 mA
14. True rms ac voltage measurement to 1 kHz
15. Frequency measurement to 20 kHz
16. Diode test and continuity beeper
17. DC current source/loop calibrator
18. 20 mA current source/simulator
Specification:
Current Adjust mode:
Manual: coarse adjustment (1 mA), fine adjustment (0.000mA) and step 25%
Auto: slow smooth ramp, fast smooth ramp, slow smooth rate, fast smooth rate, 25% step
Go to Buy: Original YHS-787 Digital Process Calibration Multimeter Tester