Car Vgate vLinker FD ELM327 FORScan
Car Vgate vLinker FD ELM327 FORScan For Ford wifi Bluetooth-4.0 OBD2 Car Diagnostic Auto Tool OBD 2 Scanner J2534 PK ELM327 v1.5
Car Vgate vLinker FD ELM327 FORScan For Ford wifi Bluetooth-4.0 OBD2 Car Diagnostic Auto Tool OBD 2 Scanner J2534 PK ELM327 v1.5 is a one of our Car Vgate vLinker FD ELM327 FORScan Tools, you can buy Car Vgate vLinker FD ELM327 FORScan For Ford wifi Bluetooth-4.0 OBD2 Car Diagnostic Auto Tool OBD 2 Scanner J2534 PK ELM327 v1.5 from ukobd2.com.
Wholesale Top quality VAS6154, GM Tech2, VCM II For Ford, Handy Baby II Car Key Chip Copier, CDP DS150
images of Car Vgate vLinker FD ELM327 FORScan For Ford wifi Bluetooth-4.0 OBD2 Car Diagnostic Auto Tool OBD 2 Scanner J2534 PK ELM327 v1.5
Vgate vLinker FD+ ELM327 Bluetooth 4.0 FORScan for Ford Wi-Fi OBD2 Car Diagnostic Scanner – J2534 Auto Tool (ELM327 v1.5)
Purchase Notes
- Our store sells the original vLinker. We have software to test if it's an original vLinker—if you need verification, please contact us. Avoid getting fake vLinker units from other stores.
- If you use Bluetooth 4.0 to connect, please pair directly via the diagnostic app.
- vLinker FM+ also supports other vehicles that comply with OBD2 standard protocols.
Vgate FD+ Professional Hidden Function Scanner – Fully Compatible with FORScan for Ford (2013+)
Detection & Activation Functions:
- Automatically lock
- Speeding reminder
- Emergency brake flashing lights
- Lock the car and whistle
- Xenon lamp mode
- One-click skylight control
- Tire pressure monitoring
- Snowflake logo activation
- Cruise function
- Compass display
- Average (instantaneous) fuel consumption
- ECO energy-saving mode
- Steering power adjustment
Vgate vLinker FD+ – Professionally Optimized for FORScan
- Supports programming and diagnostics for Ford vehicles
- Read / Clear Engine DTCs
- Adjust parameters
- Refresh parameters
- Activate hidden functions
- Read live data stream
Supported Protocols
Multiple Protocol Formats:
- 15 ELM format protocols
- 23 STN format protocols
- Up to 64 user-defined protocols
OBDII 5 Standard Protocols:
- SAE J1850 VPW
- SAE J1850 PWM
- ISO 9141-2
- ISO 14230-4
- ISO 15765-4 CAN
Additional Protocols:
- SAE J1939 CAN
- ISO 11898 (raw CAN)
- Medium Speed (MS CAN)
These protocols cover almost 99% of OBDII-compatible vehicles on the market.
Advanced Instruction Set – Enhanced App Compatibility
- Fully compatible with ELM's AT command set
- Fully compatible with STN's ST command set
- 39 VT macro commands—some equivalent to multiple AT/ST instructions, simplifying communication steps
- Compatible with ELM and STN power management solutions
- Supports up to 5 sleep triggers: instructions, UART silence, low battery voltage, OBD bus silence, etc.
- Supports up to 5 wake-up methods: UART activity, battery voltage recovery, OBD bus activity, ignition key, etc.
- Device sleep power consumption is less than 2 mA
- OBD request frame supports up to 48 bytes for special long-frame communication needs
- UART data buffer up to 2K bytes; baud rate increased to 230.4 Kbps
- 256-byte internal storage unit
- Endurance: over 100,000 erase/write cycles
- VT commands enable read/write operations on any storage unit
- Supports "Mix ID Sending" mode for CAN protocol
- Optional formatted data transmission per protocol
- Multiple WM sequence settings
- AT command support for manual WM sequence configuration
- Temporary WM sequence assignment per protocol or globally
- Permanent binding of a protocol to a private WM sequence
-- Secure bootloader for easy firmware updates
Installation Guide
Package Contents
- 1 x Vgate vLinker (BT3.0 / BT4.0 / Wi-Fi version)
- 1 x User manual
