Meter Tester

YHS718 voltage and current calibrator (Volt / mA Calibrator) can be used for calibration, repair and maintenance the calibrated instrument which has 0-100mV/10V voltage signal or 0-20mA loop current, such as electric actuators, hydraulic actuators, pneumatic actuators, electric actuator mechanism, electricity - gas valve positioners and valve positioners, etc.

New Original YH-718 Loop Volt and mA Signal Source Process Calibrator Meter Tester is a one of our Meter Tester Tools, you can buy New Original YH-718 Loop Volt and mA Signal Source Process Calibrator Meter Tester from ukobd2.com.

Wholesale Top quality VAS6154, GM Tech2, VCM II For Ford, Handy Baby II Car Key Chip Copier, CDP DS150

images of New Original YH-718 Loop Volt and mA Signal Source Process Calibrator Meter Tester

New Original YH-718 Loop Volt and mA Signal Source Process Calibrator Meter TesterNew Original YH-718 Loop Volt and mA Signal Source Process Calibrator Meter TesterNew Original YH-718 Loop Volt and mA Signal Source Process Calibrator Meter TesterNew Original YH-718 Loop Volt and mA Signal Source Process Calibrator Meter TesterNew Original YH-718 Loop Volt and mA Signal Source Process Calibrator Meter TesterNew Original YH-718 Loop Volt and mA Signal Source Process Calibrator Meter TesterNew Original YH-718 Loop Volt and mA Signal Source Process Calibrator Meter TesterNew Original YH-718 Loop Volt and mA Signal Source Process Calibrator Meter Tester

New YH-718 Loop Volt and mA Signal Source Process Calibrator Meter Tester

Feature:


1. Rapid induction knob, Single-handed operation possible
2. 0.02% accuracy and 1μA/10μV resolution
3. Steps and ramp output optional
4. 24V loop Power and processing mA measurement
5. mV/V voltage output, measurement functions; showing the percentage of mV/V and range
6. mA current source output, simulation and measurement functions; showing the percentage of mA and range
7. Rechargeable management module built-in, able to charge while working1. Rapid induction knob, Single-handed operation possible

Current output mode:

SOURCE mA mode: Calibrator outputs current
SIMULATE mA mode: Calibrator simulates an external power supply with a two-wire transmitter

Voltage output mode:

Instrument outputs a high - precision voltage signal 0-100mV/0-10V; Voltage signal output resolution up to 10μV

Automatic ramp current output:

The calibrator can periodically output a changing current / voltage signal applying to the external load or loop device continuously according to the time interval automatically.

Technical specifications:

Loop Power :24V—26V

DC mA (source output / simulation / measurement):

Range: 0 - +24 mA;
Resolution: 1μA;
Accuracy: ± (0.02% +4 words)

DC voltage (output / measurement):

Range: 0 - +10 V;
resolution: 1mV;
Accuracy: ± (0.02% +4 words)

Range: 0 - +100 mV;
Resolution: 10μV;
Accuracy: ± (0.02% +4 words)


Go to Buy: New Original YH-718 Loop Volt and mA Signal Source Process Calibrator Meter Tester

LONSDOR Key Programmer Porsche Piwis III GM Tech2 USB Link 2 CAN Clip wiTech MicroPod 2 T300 key programmer locksmith tools a b c d e f g h i j k l m n o p q r s t u v w x y z
Share to Pinterest