XP400
Autel XP400 Key and Chip Programmer Work with Autel MaxiIM IM608/IM508, which supports MCU, ECU, EEPROM read and write, Mercedes Infrared Key Reading & Writing, Finding the Control Frequency and IC Card Reading & writing.
Autel XP400 Key and Chip Programmer Work with Autel MaxiIM IM608/IM508 is a one of our XP400 Tools, you can buy Autel XP400 Key and Chip Programmer Work with Autel MaxiIM IM608/IM508 from ukobd2.com.
Wholesale Top quality VAS6154, GM Tech2, VCM II For Ford, Handy Baby II Car Key Chip Copier, CDP DS150
images of Autel XP400 Key and Chip Programmer Work with Autel MaxiIM IM608/IM508
Autel XP400 Key and Chip Programmer – Compatible with Autel MaxiIM IM608/IM508
Autel XP400 Key & Chip Programmer Functions
- Support PC
- MCU / EEPROM Chips Read / Write
- ECU Read / Write
- MC9S12 Encryption Chip Read / Write
- Key Read / Write
- Mercedes Infrared Key Read / Write
- Remote Frequency Detect
- IC Card Read/Write
XP400 Key & Chip Programmer Instructions
- Connect the IM608 tablet to the XP400 Key Programmer (no vehicle connection required) to access the key chip, read, retrieve and write key information, as well as other key-related functions.
XP400 Device Components
- 1. Remote Control Transponder Induction Area Figure 2-5 XP400 Views 11
- 2. Transponder Slot – holds the transponder.
- 3. Mercedes Infrared Key Slot – holds the Mercedes infrared key.
- 4. Vehicle Key Slot – holds the vehicle key.
- 5. IC Card Induction Area
- 6. Status LED – indicates the current operating status.
- 7. Cross Signal Pins – holds the MCU board, MCU spare cable or DIY signal interface.
- 8. EEPROM Locker – locks the EEPROM component transponder slot to ensure proper functioning.
- 9. EEPROM Component Transponder Slot – holds the EEPROM plug-in transponder or EEPROM socket.
XP400 Ports and Connections
- 1. DC Port – provides 12V DC power supply.
- 2. USB Port – provides data communication and 5V DC power supply.
- 3. DB 26-Pin Port – connects with the Mercedes Benz infrared cable, vehicle key cable, ECU cable, MCU cable, MC9S12 cable.
Compatible Cables for XP400
- Mercedes Infrared Cable
- APA102 – Remote Match Cable (optional)
- APA104 – ECU Cable
- APA105 – MCU Cable
- APA106 – MC9S12 Cable
Why Buy an XP400 Device?
- If your Original XP400 for IM608 / IM600 is broken, you can buy this to replace the old one. Or if you have a MaxiIM IM508 or Otosys IM100 and want to perform advanced IMMO reprogramming like the IM608 / IM600, you can add an XP400 to your setup. It then enables IMMO functions equivalent to those of the IM608 / IM600. For a detailed comparison between XP400 and XP200 functions, please refer to the chart below.
Go to Buy: Autel XP400 Key and Chip Programmer Work with Autel MaxiIM IM608/IM508