mini elm327 wifi
New Arrival Code reader Diagnostic Tool Super Mini ELM327 WiFi with Switch Work with iPhone OBD-II OBD Can Code Reader Tool
Super Mini ELM327 WiFi with Switch Work with iPhone OBD-II OBD Can Code Reader Tool is a one of our mini elm327 wifi Tools, you can buy Super Mini ELM327 WiFi with Switch Work with iPhone OBD-II OBD Can Code Reader Tool from ukobd2.com.
Wholesale Top quality VAS6154, GM Tech2, VCM II For Ford, Handy Baby II Car Key Chip Copier, CDP DS150
images of Super Mini ELM327 WiFi with Switch Work with iPhone OBD-II OBD Can Code Reader Tool
New Arrival: Super Mini ELM327 WiFi OBD-II Code Reader Diagnostic Tool with Switch for iPhone
Top 4 Reasons To Get Super Mini ELM327
- Software Version: V2.1
- Hardware Version: V1.5
- Vehicle Compatibility: Works with all 1996 and later vehicles. Connects to your iPhone, iPod touch, or iPad via Wi-Fi in ad-hoc mode.
- Protocol Support: Automatically detects and communicates using the following protocols:
- ISO 9141
- ISO 11898 (aka CAN)
- ISO 14230 (aka KWP2000)
- ISO 15765 (aka CAN)
- SAE J1939
The WI-FI OBD AUTO CHECKER automatically detects and interprets these protocols. It supports high-speed communication and features a low-power sleep mode. Communication with host devices—such as PCs, notebooks, iPhones, iPod touches, and iPads—is handled via standard AT commands. Numerous compatible software packages are available, offering useful features like real-time engine parameter monitoring, DTC reading and clearing, and MPG metering. Advanced users can even develop custom software, as the AT command set is fully documented and well explained.
Measuring just 2.7 x 1.25 x 0.9 inches, the device includes a built-in power switch to eliminate the need for frequent disconnection from the OBD-II port. It is compatible with all 1996 and newer vehicles and connects to iOS devices via Wi-Fi in ad-hoc mode.
OBD-II Compliance Information
Older OBD-compatible vehicles typically have a sticker under the hood indicating OBD compliance. All model year 1996 and newer vehicles sold in the United States are OBD-II compliant by default and may not display this sticker.
Readable Vehicle Parameters
The following parameters can be read from supported vehicles:
- Vehicle Speed
- RPM
- Fuel Consumption
- Engine Coolant Temperature
- Fuel Pressure
- Calculated Engine Load
- Throttle Position
- Intake Manifold Pressure
- Air Intake Temperature
- Timing Advance
- Mass Air Flow
- Fuel Level
- Barometric Pressure
- EVAP System Vapor Pressure
- Fuel Trim
Note: Your vehicle may not support all of the above parameters. The number of available parameters depends on the vehicle manufacturer’s implementation.
Vehicles Supported
Our device works with all 1996 to 2010 cars and light trucks sold in the United States, including:
Some 1994 and 1995 models are also supported. To verify if your vehicle is compliant, open the hood and look for this sticker:
Technical Specifications
- SSID: WiFiOBD
- IP: 192.168.0.10
- Subnet: 255.255.255.0
- Port: 35000
- Range: 50 ft (line of sight)
- Antenna: Internal
- Power Consumption: 0.75 Watts (with Power Switch)
- Wi-Fi Standard: 802.11a/b/g
- Operating Temperature: -15 to 100°C
- Plastic: Automotive Grade
- Physical Dimensions: 2.75 x 1.25 x 1.2 inches
Compatible Software and Features
The features available depend on the software installed on your iPhone, iPod touch, iPad, or PC. Numerous commercial and free software options exist, each offering different capabilities. Users should select software based on their individual preferences. For detailed information about specific software, please consult the respective software vendors.
Go to Buy: Super Mini ELM327 WiFi with Switch Work with iPhone OBD-II OBD Can Code Reader Tool