468 Key Pro Third Generation ID46 Copy Key Programmer

Language Support: English

How to Update the 468 KEY PRO Third Generation

1. Install the driver.
2. Open the upgrade program and select the COM port.
3. Open the file in the upgrade program (upgrade v1.02 New.bin).
4. After clicking the electrical source, the upgrade button will turn black. Wait until the progress scroll bar completes.
5. The PC will prompt “Upgrade Success.”

Attention: This device does not support copying ID48 and 4D chips.

How to Operate the 468 Key Pro III

1. Turn on the left switch of the 468 KEY PRO third generation. The main interface will appear. Click COPY → copy46.
2. Click CMT46 collect in the upper left corner of the screen.
3. This page is for copying the ID46 chip. The device is now copying an ID46 chip.
4. 3.1. Place the original chip vertically into the bottom right corner of the slot, then click Read UID.
   Note: Do not lay the chip flat near the hole—it may prevent proper reading of the chip’s information.
5. 3.2. Place the new key vertically into the bottom right corner of the slot, then click Conf ig.
   Note: Do not lay the key flat near the hole—it may prevent proper reading of the chip’s information.
6. 3.3. Use the new car key to collect information from the vehicle:
   First, take a key blank and insert the new key into it. Then insert it into the car’s ignition and perform four consecutive starts, with a 3–5 second interval between each start.
7. 3.4. Place the key that has already collected vehicle information vertically into the bottom right corner of the slot, then click Read. The screen will display a set of random numbers and a signature.
8. After cracking the original key, place the original key vertically into the bottom right corner of the slot and click Crack. The screen will show the progress of the original key cracking process.
9. To copy to a new key, place the key that has already collected vehicle information vertically into the bottom right corner of the slot and click Copy. The screen will display a copy successful message.
10. If the chip key copy fails during the process, place the key into the bottom right corner of the slot and click Initialize, then restart from step 1.

Packing List

• 1 pc × 468 KEY PRO