Yamaha Immobilizer Emulator (2006–2009 Models)

Immobilizer Emulator for Yamaha Motorcycles and Scooters

This immobilizer emulator is designed specifically for Yamaha motorcycles and scooters manufactured between 2006 and 2009.

No programming is required—installation only involves connecting the appropriate wires.

The emulator fully replicates the functionality of the original immobilizer system, including the operation of the LED indicator on the instrument panel.

Installation Instructions

To install the emulator in place of the original immobilizer:

1. Remove the glue seal from the immobilizer housing.
2. Extract the PCB from the immobilizer and desolder the connected wires.
3. Connect the emulator according to the wiring diagram below.
4. Place the emulator into the original immobilizer housing.

Wire Color Coding and Functions

• Black (2 pcs.): GND
• Red: BATT (+12V)
• Yellow: IGN (+12V)
• Gray: LED (+5V)
• Blue: K-line (Immo-ECU)