Original Alientech KESS3 ECU and TCU Programming Tool with DynoDrive Activated Via OBD / Bench and Boot Mode

The KESS3 is the latest ECU tuning tool from Alientech that replaces both the KESSv2 and K-TAG. KESS3 gives you more control than its predecessors, KESSv2 and K-TAG, and can be upgraded without the need to spend money on new hardware. This new tool allows users to remap in a faster, easier way than ever before, with the ability to use both OBD or Bench Tuning methods from the same device. You no longer need separate tools for OBD and Bench Tuning. With the new KESS3, this is now a combined feature.

Important Notice

• Package includes: Original Alientech KESS V3 KESS3 and DynoDrive Activation
• Once sold, no refund or return service is allowed for the KESS3 device and authorization.
• For any product questions, you can contact the official website technology directly.
• Free 12 months Subscription
• KESS3 KESSV3 Vehicle List Download

ALIENTECH KESS3 Features

• OBD Tuning
• Bench/Boot Tuning
• Upgradable from Slave to Master
• Separate Car & Bike Protocols
• Works with some existing KESSv2 cables
• Uses Alientech Suite
• Upgraded Cable Set
• Superfast Checksum Calculations
• 10x Faster Processing

ALIENTECH KESS3: All-in-One Solution

1. All in One – OBD, Bench and Boot Mode

KESS3 combines 3 operating modes in one tool: OBD, Bench, and Boot Mode. Configure it according to your needs and your work. Whatever your level and experience in remapping, KESS3 gives you the best.

• OBD – With the OBD mode, you can easily access all the ECU data through the diagnostic socket.
• BENCH – A simple interface to the connector and you have complete access to the data of your ECU.
• BOOT – This mode allows you to access all system data areas. Read, Write and Clone.

2. The CPU

The most powerful microprocessor on the market. 7 times more powerful than the previous generation. Pure power that can execute your commands reliably, faster and more efficiently.

3. Lines of Communication

KESS3 automatically and instantly recognizes the right communication line, to work faster, using only an OBD cable. Ethernet, FlexRay, CAN Bus, K-Line, L-line, J1850, J1708.
All the essential lines to start any operation inside the vehicle in total safety.

4. Projected towards the Future

GPS, Accelerometer, Bluetooth, and Wi-Fi. All embedded in one platform.
The combination of these features and the constant technological developments that distinguish us will allow us to develop many new functions in the future.

5. High Performance

The renewed USB Full speed chip allows an up to 10x increase in the performance of importing and exporting files to and from the KESS3.
But not only that, Alientech added a new web infrastructure to the new KESS3.
The result being, an Alientech cloud with improved speed and performance.

6. Multi-language Support

Supported Language: English, Italian, French, German, Spanish, Portuguese, Chinese, Polish, Russian.

VERSIONS: Master or Slave

Master or Slave? Buy what you need

The Master version can manage the SLAVE version.
The SLAVE version cannot modify files, it can only read and write files. Only the Master version can modify files.

A single flexible device that can be configured as required, when the tool is initialized, you can choose the mode of operation.

• MASTER – The configuration that allows you to edit software calibrations in a completely autonomous way. The read files can be interpreted by your choice of remapping software.
• SLAVE – If you are not confident yet or sufficiently autonomous in editing software calibrations, thanks to this mode you can work with a network of trainers who will support you with file requirements.

DEALER-NETWORK: If you intend to create your own slave network of tuners, you will have a reliable and easy to use tool.

Notice: If you buy slave version and want upgrade to Master version, you can just pay for the price difference and get upgraded.

Licenses You Can Buy

You need to buy any of those licenses to work together with your KESS V3 hardware. If you need to buy more than one license, you can contact our customer service to get discounts.
When purchasing the device, at least one software protocol is required. The basic version cannot function without licenses and is not sold separately! Upon purchasing a protocol you will receive software updates and free technical support for a year. In the future, the subscription is renewed for an annual fee.

Available Licenses

• XNR-SS451-MA001 KESS3 Master - Car - LCV OBD Protocols activation
• XNR-SS451-MA002 KESS3 Master - Bike - ATV & UTV OBD Protocols activation
• XNR-SS451-MA003 KESS3 Master Agriculture - Truck & Buses OBD Protocols activation
• XNR-SS451-MA004 KESS3 Master - Marine & PWC OBD Protocols activation
• XNR-SS451-MA005 KESS3 Master - Car - LCV Bench-Boot Protocols activation
• XNR-SS451-MA006 KESS3 Master - Bike - ATV & UTV Bench-Boot Protocols activation
• XNR-SS451-MA007 KESS3 Master - Agriculture - Truck & Buses Bench-Boot Protocols activation
• XNR-SS451-MA008 KESS3 Master - Marine & PWC Bench-Boot Protocols activation
• XNR-SS451-SA001 KESS3 Slave - Car - LCV OBD Protocols activation
• XNR-SS451-SA002 KESS3 Slave - Bike - ATV & UTV OBD Protocols activation
• XNR-SS451-SA003 KESS3 Slave - Agriculture - Truck & Buses OBD Protocols activation
• XNR-SS451-SA004 KESS3 Slave - Marine & PWC OBD Protocols activation
• XNR-SS451-SA005 KESS3 Slave - Car-LCV Bench-Boot Protocols activation
• XNR-SS451-SA006 KESS3 Slave - Bike - ATV & UTV Bench-Boot Protocols activation
• XNR-SS451-SA007 KESS3 Slave - Agriculture - Truck & Buses Bench-Boot Protocols activation
• XNR-SS451-SA008 KESS3 Slave - Marine & PWC Bench-Boot Protocols activation
• XNR-SS451-M5001 KESS3 Master - 12 Months Subscription
• XNR-SS451-M5002 KESS3 Master - 6 Months Subscription
• XNR-SS451-SS00012 KESS3 Slave - 12 Months Subscription
• XNR-SS451-SS0006 KESS3 Slave - 6 Months Subscription
• XNR-SS481 DynoDrive Activation KESS3MKWO For Alientech KESS3 Master / KESS3 Slave / KESS3 Hardware

Bundled Packages

• SE178+XNR-SS451-MA005 KESS3 Master Version with Car Bench-Boot LCV Protocol Activation
• SE178+XNR-SS451-SA001+XNR-SS451-SA005 KESS3 Slave Version with Car OBD-Bench-Boot LCV Protocol Authorization
• SE178+XNR-SS451-MA001+XNR-SS451-MA005 KESS3 Master Version with Car OBD-Bench-Boot LCV Protocol Authorization
• SE178+XNR-SS481 KESS3 with DynoDrive Activation

Other Optional Accessories You May Need

• XNR-SS457 Alientech ECM Titanium - 200x Download Credits for Driver
• XNR-SS457-B Alientech ECM Titanium - 400x Download Credits for Driver
• XNR-SS457-C Alientech ECM Titanium - 800x Download Credits for Driver
• XNR-SS456 Alientech ECM Titanium - 12 Months Subscription Fee Annual Fee
• SE180 Alientech ECM Titanium - Full Version Unlimited Recalibrations Need Bind with KESSV3 Master (Annual Subscription Fee Required)
• SE180-B Alientech ECM Titanium - Full Version Unlimited Recalibrations No Need KESSV3 KESS3 (Annual Subscription Fee Required)
• SE180-C Alientech ECM Titanium - Full Version with 1000 Credits
• XNR-SS458 Alientech Official Online Basic Training Course About ECU Chip-tuning

DynoDrive Activation KESS3MKWO For Alientech KESS3 Master / KESS3 Slave / KESS3 Hardware

DynoDrive

DynoDrive is an advanced feature, exclusive to Alientech Suite and KESS3, which allows for calculating and verifying performance while driving a vehicle. Through the OBD diagnostic port and data acquisition from the integrated GPS module,
DynoDrive provides power and torque values of a car that can be exported and compared endlessly on your reserved area.

DynoDrive Highlights

• Activation through Alientech Suite
• Calculation accuracy (GPS & x-Line)
• Quick and customised parameter selection
• Test repeatability
• Data comparison and sharing

DynoDrive Activation for Alientech KESS3

Package Includes:

• 1pc x KESS3 main unit
• 3pcs x adapters
• 1pc x power adapter
• 2pcs x jumpers
• 3pcs x cables
• 1pc x main cable
• 1pc x USB cable
• 1pc x DC male plug to dual alligator clip DC power cable