Lonsdor K518ISE Key Programmer Plus SKE-IT Smart Key Emulator 5 in 1 Set Full Package

Main Functions & Features

• Immobilization
• Odometer adjustment
• Built-in Volkswagen 4th and 5th adapter
• Built-in Chip & remote detection module
• Free BMW FEM key programming

Special Features

• Volvo (S40, S60, S80, XC60, XC90, C30, C70, V40, V60, V70) key programming
• Toyota/Lexus: smart key all key lost via OBD (without dismantling)
• BMW CAS3/CAS3+/CAS3++: direct OBD programming
• BMW CAS4/CAS4+: dismantle & read data programming
• 16-New Maserati: smart key programming
• 16-New Ford: smart key programming
• Hyundai / Kia 46/47/8A smart key: PIN code reading via OBD, all key lost included
• Renault (Megane, Koleos, Scenic): key programming without PIN code
• VAG group 4th & 5th immobilizer system
• Ferrari (458, F12, F149): direct OBD programming
• Peugeot / Citroen: two methods to read PIN code & program keys, including all keys lost scenarios

Product Highlights

1. The best car diagnostic tool based on Android
2. WIFI networking ensures convenient software upgrading
3. No need for memory card or computer connection via data cable—more flexible for online upgrading, updating, and activation
4. Equipped with USB-B 2.0 standard connector and integrated OBD-II test cable with diagnostic adapter functionality
5. Greatly accelerated diagnostic speed improves work efficiency and saves time
6. 7-inch high-brightness, high-definition color IPS capacitive screen
7. 3800mAh polymer battery
8. Supports external memory expansion up to 32GB
9. Built-in professional, powerful operation assistant system

Lonsdor K518ISE can program Toyota/Lexus smart key all key lost via OBD by working together with the extra SKE-LT Smart Key Emulator 4 in 1 Set.

SKE-LT Smart Key Emulator Variants

• Black: SKE-LT-DST40(94/D4) – Supports 94/D4 smart key
• Red: SKE-LT-8A(88/A8) – Supports 88/A8 smart key
• Green: SKE-LT-DST80(98) – Supports 98 smart key
• Blue: SKE-LT-8A(A9) – Supports A9 smart key

Usage Instructions

1. Press and hold the power button for 2 seconds to turn on/off. In standby mode, the device automatically shuts down after 2 minutes. After three power cycles, the key is initialized and ready for reuse.
2. Status indicator: Blue = normal; Red = hardware failure
3. Before first use, open the back cover of each emulator and install the battery.

Steps to Install Battery

SKE-LT Smart Key Emulator 4 in 1 Functions

• Bind emulator key: Required on first use—bind SKE-LT emulator to K518ISE main unit
• Backup EEPROM data: Back up onboard computer immobilizer data
• Make emergency emulator key: Use backed-up immobilizer data to create a designated SKE emulator key that replaces the original master key, enabling ignition start and subsequent smart key addition
• Add smart key: Add a new smart key
• Delete smart key: Remove a programmed key

Lonsdor Orange SKE-LT-DSTAES – The 5th Emulator for Toyota & Lexus Chip 39 (128bit) Smart Key All lost via OBD

Features

• all key lost support
• No internet connection required
• Supports offline calculation

Supported Vehicle Models (Chip 39 - 128bit)

• Hilux – OK
• Fortuner – OK
• YARIS – OK
• No server connection needed

Package Contents

• 1 × Portable Bag (large)
• 1 × Main Host
• 1 × Power Adaptor
• 1 × USB Cable
• 1 × Packing Bundle
• 1 × OBD Test Cable
• 1 × Extra Connector
• 1 × User Manual
• 1 × Portable Bag (small)
• 1 × KPROG Adapter
• 1 × RN-01 Board
• 1 × E-01 Board
• 1 × FS-01 Board
• 1 × 20P Cable
• 5 × Backup Pin
• 1 × Certificate
• 4 × Smart Key Emulator
• 1 × Orange SKE-LT-DSTAES (5th Emulator)