- Car Diagnostic Tools
- Original Brand Tools
- Car Key Programmers
- OBD2 Code Scanners
- Truck Heavy Duty Scanners
- ECU Chip Tuning Tools
- Odometer Correction Tools
- VAG Diagnostic Tool
- Original Launch X431 Tools
- Car Key Blanks
- Key Cutting & Locksmith Tools
- Airbag/Service Reset Tools
- OBD2 Cables and Connectors
- AUGOCOM Camshaft Engine Timing Tool
- Other OBDII Vehicle Tools
- Car Key Chips
- Car Diagnostic Software
- Automotive Electrical Testers & Test Leads
- Auto HID Xenon Light and LED Light
- Automotive Electronics
- Repair & Maintenance Tools
- MB Star Diagnostic Tools
- Health Care
- Special Deals
- Consumer Electronics
- Home & Garden
- Expired Tools
- Top Selling
- New Arrivals
- for MB
- for Porsche
- for TOYOTA
- for FORD
- Order Tracking
Humzor NS366S Car Diagnostic Scanner Tablet Full System for SAS CVT Gear Learning 13 Reset Automotive OBD 1/2 Diagnostic Tool
Related Accessories/Similar Items
Humzor NexzDAS NS 366S Bluetooth 10.1inch Tablet All System OBD1/2 Scanner
Car Diagnostic Tool Auto Code Reader with DPF SAS CVT Gear Learning Reset
NexzDAS NS 366Sis the high-end professional and intelligent diagnostic equipmentfor car full system scan. Featuring the powerful tablet with10.1 inch capacitive screen and based on Android 10.0 multitasking operating system, it greatly provides a quick access to read/clear codes for all the available modules of wide vehicle makes, and offers the perfect diagnostic solution for mechanics who demand unrivalled OE level smart technology and smart repair.
Top Reasons to Choose NexzDAS NS 366S
1.AfFORDable and Powerful
Freely choose Tablet，iOS and Android smartphones to achieve intelligent and efficient operation, making diagnosis easier.
3.Android 9.0 System version,10.1-inch LCD Touch Screen
4.Full systems diagnosis
Full-system quick scanfor passenger cars, deep diagnosis on all the electronic systems of the car with detailed report, Engine, Transmission, ABS, SAS, SRS, TPMS,etc.
5. key programmer & immo
6. 13 special functions & Reset service
Oil Reset, TPMS, ABS, SAS, TPS, DPF, EPB, Battery Test, Injector Adjust，IMMO Prgoramme，CVT Learning,Gear Learning，Odometer Management all included to meet your extra demands.
8.Complete OBD2 and OBD 1 Functions
Fully covers OBD2and OBD 1 diagnosis modes, read current.,pending and permanent codes quickly, clear fault codes and turn off the Check Engine Light.
9. Support more than 83+ car brands,about 1000+ models
Full OBD 1 and OBD 2 Diagnosis,Powerfully support more car brands, including American, European, Australian, Asian cars.
10. via Bluetooth automatic connection9,User-friendly Experience
Quick access to VIN Query, DTC Query, Data Manage, Data playback,Remote Assistance, Feedback icon, Screenshot, etc. fully provide you with intelligent and easy operation.
Switch the language you need within the App freely, English, Italian, German, Russian, French, Spanish, Polish, Japanese, Portuguese, Dutch, Hungarian, Traditional Chinese,more are under adding.
12.Free Download & Update
Free download and update for wide vehicle models in the App Store of the software. Updating the software for free for two years.Updating the software need to pay half of the product price if more than two years!
Read/clear codes for all systems, input the VIN and automatically recognize it, or manually select the vehicle model，type and year to start the quick scan for all the control units and get the inspection result with detailed DTC description.
Get access to the vehicle-specific subsystem and component parts, and output commands to the related ECU, thus driving the actuators to perform a specific function for determining the integrity of the system or parts by reading the engine ECU data, or by monitoring the operation of the actuators, such as switching a solenoid, relay, or switch, between two operating states.
European：ABARTH, ALFA ROMEO, ASTON MARTIN, AUDI, BENTLEY, BENZ, BMW, BUGATTI, CITROEN, CVVW, DACIA, FERRARI, FIAT, FORD, JAGUAR, LAMBORGHINI, LANCIA, LANDROVER, MASERATI, MINI, OPEL, PEUGEOT, PORSCHE, RENAULT, ROLLS ROYCE, SAAB, VW, SEAT, SKODA, VAUXHALL, VOLVO, SPRINTER, MAYBACH
Chinese: BYD, CHANGAN, CHANGHE, CHERY, EMGRAND, ENGLON, FOTON, GEELY, GLEAGLE, GWM, HBSH, HUACHEN, WULING, YUAN, ZOTYE, VW
Australian: FORD, HOLDEN ,More
Models Coming Soon...
NexzDAS NS 366S Supports Full OBD2 Functions
It comes with 6 OBD adapters for the car with OBD1 interface!
·Read and Clear Codes: Read and clear engine codes. Stored, Pending and Permanent for all makes.
·Live Data: DIY diversified PID display method(Graphic display, Dashboard display and Digital display). iOS supports 4 parameters comparison and Android supports 2.
·Freeze Frame: Freeze Frame data is a snapshot of the vehicle when the Freeze Frame code was stored.
·O2 Sensor: Check the vehicle O2 sensor values.
·On Board Monitor Test (Mode 6): Advanced test results (like misfire counts) for on-board diagnostic system monitors.
·Component Test (Mode 8): Component Test: Certain vehicle components can be actuated by commands sent from the scanner to test their operability.
·Battery Test：Show battery voltage and comment battery status.
·Smog Check：Indicate whether or not the various emissions-related systems on the vehicle are operating properly and are ready for inspection and maintenance testing.
·MIL Status : MIL is essentially an emission warning light. If the light comes on, it means the OBD II system has detected an emissions-related problem.
·Vehicle Info：Check the make，years，VIN Code and other detail information of your Vehicle.
13 Special Functions
Note：These special functions are not for all car models, if you are confused, please send me your car model and we will check it for you.
Oil Reset：Allows you to perform reset maintenance mileage and data intervals for a new calculation of Engine Oil Life system once changed the oil.
TPMS：Makes tpms sensor in displaying sensor IDs from the vehicle’s ECU, inputting TPMS sensor replacement IDs and activate tpms sensors.
Injector Adjust：Diesel injector code need programming ID and parameters to the ECU for accurate communication and Injection control system.
EPB：It is important in the maintenance of electronic braking system’s safety and efficiency when replace brake pad or motor.
DPF :Specially works for Diesel Particulate Filter system with DPF regeneration, DPF component replacement teach-in and DPF teach-in after replacing the engine control unit.
TPS/ThrottleSensor:Vehicle's throttle position system sensor connected to the butterfly spindle and is primarily used to monitor the throttle position within an inner coMBustion engine. Due to its location, the throttle position sensor is able to effectively observe where the throttle butterfly valve is positioned.
ABS Bleeding:The auto bleed procedure is used on BOSH 5.3 equipped vehicles. This procedure uses a scan tool to cycle the system solenoid valves and run the pump in order to purge the air from the secondary circuits.
SAS: Helps clear the fault steering angle sensor memories and plays an important role in the steering angle sensor calibration.
Battery Test:Allows the scan tool to evaluate the battery charge state, monitor the close-circuit current, register the new battery replacement, and activate the rest state of the vehicle battery system
CVT Learning:This function is used to reset the compensation code and initialize the ECT after a solenoid value or value body asseMBly has been replaced.
Gear Learning:The scan tool monitors certain Camshaft position sensors signals to determine if all conditions are met to continue with the procedure for Engine running.
ØImmo Code Reading: Can read the Immo code of specific car models.
ØKey Programming:Greatly supports key matching.
ØAdd car key: Add and match new key to the car.
ØErase car key:Delete the key that does not need.
ØKey information reading:Read the information of the key, quantity,frequency etc.
Support 13 languages at present: English,Spanish, Italian, French, Russian, German, Polish, Japanese, Portuguese, Dutch, Hungarian, Chinese, Traditional Chinese. More are under developing, can up to 23 kinds.
1.Where to download APP?
--For NexzDAS APP, please kindly search ‘NexzDAS’ on Google Play or kindly scan the QR code below to download.
2.How to connect the Bluetooth?
--After plug into the VCI, open the NexzDAS App and click the Bluetooth icon at the upper right corner within App to connect it directly, the icon light will turn into blue which means connection succeeds. If it can not be connected the first time，please kindly exit the software completely and try again.
3.Why cannot I binding the product, it shows serial number does not exist?
--Please make sure you download the right software “NexzDAS”. If the problem still exists, please contact us and offer your S/N for a check.
4.Why there is nothing listed when I login, no models or functions?
--Please click ‘Discover’ ‘APP store’ and choose download the models and functions you need.
- Related Items
- Recommond Tools
- Hot Sale
- On Sale
- New Arrivals
- Freeshipping Items
€999.00 / piece
€179.00 / piece
€64.99 / piece
€1,699.00 / piece
€199.00 / piece
€79.90 / piece
€1.90 / piece
€37.99 / piece
€209.00 / piece
€109.00 / piece
€39.70 / piece
€39.99 / piece
€889.00 / piece
€797.05 / piece
€929.00 / piece
€257.99 / piece
€799.00 / piece
€177.00 / piece
€49.99 / piece
€199.00 / piece
€189.00 / piece
€289.00 / piece
€274.28 / piece
€889.00 / piece
€99.65 / piece
€39.18 / piece
€259.00 / piece
€52.91 / piece
€149.00 / piece
€499.00 / piece
€26.99 / piece
€58.99 / piece
€17.99 / piece
€24.91 / piece
€32.15 / piece
€15.59 / piece
- €384.00 / piece
- €58.99 / piece
- €449.00 / piece
- €989.00 / piece
- €899.00 / piece
- €310.00 / piece